plat

Plat Maps and Surveys

The plat for your community is an important governing document. The plat is an aerial depiction of the lot boundaries, roadways, common areas, and easements. The filing of the plat and declaration is what creates the community. The plat contains a metes-and-bounds description of the development and the dimensions of each lot and unit. Plat maps can contain very important information. For example, it may show easements, utility line locations, and maintenance obligations--all of which may or may not be found in the CC&Rs or Declaration.

For planned communities, the plat also identifies the common areas. Sometimes, common areas are referred to as "Tracts". Here's an example of a plat depicting a common area, owned by the association:

 

 

 

 

 

 

 

 

 

 

Condominium and planned community plats are slightly different in the type of information which must be contained in the plat. For condominiums, plats must show the elevations of the units. For example:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you do not have a copy of the plat for your community, you can get a copy from your county recorder or survey department. Here are the links to locate and download plat maps:

Multnomah County

Washington County

Clackamas County

Deschutes County

Clark County (WA)

WA State Supreme Court Case on Implications of Plat Dedications

On February 12, 2015, the Washington State Supreme Court issued a ruling on the implications for municipalities which accept plat dedications. In this case, the recorded plat dedicated certain ground water and storm water systems to the county. The county then accepted those dedications by signature on the plat. The homeowners association (and its members) filed suit after issues arose with a drainage pipe. The lawsuit sought to compel the municipality to take action to fix the drainage pipe. Read the case here: http://www.courts.wa.gov/opinions/pdf/895333.pdf

Governing Document Primer - Condominiums and HOAs

The term “governing documents” refers to a host of documents, some of which are recorded, some which are filed with the state, and others are merely distributed to owners. In general, governing documents include: the Declaration/CC&Rs, Bylaws, Plat, Articles of Incorporation, and Rules/Regulations/Resolutions. Understand that there is a hierarchy to these documents. For example, the board cannot adopt a rule or regulation that conflicts with provisions in the CC&Rs. See the attached charts to better understand the hierarchy:

Oregon

Washington

Let’s discuss each:

1. Plat

The plat map is the graphical depiction of the community. For planned community subdivisions, the plat is a birds-eye view of lot lines, easements, roads, and other property interests. Condominium plats are slightly different. Condo plats include the elevation drawings of the structures, and show the boundaries between the units, limited common elements, and general common elements. Often, plats will have notations regarding ownership of common areas, maintenance obligations, and references to the CC&Rs. Plats are recorded with the county recorders office.

2. Declaration/CC&Rs

Think of the CC&Rs as the constitution of the community. When you purchase property in a community association, you do so subject to the conditions in the CC&Rs and the other governing documents. The CC&Rs usually include: a description of the property, what you can and can’t do on your lot or on common property, the authority to assess regular dues, provisions related to insurance, and who is to maintain, repair and replace property throughout the community. Like the plat, CC&Rs are also recorded with the county recorder.

3. Articles of Incorporation

This document establishes the corporate structure for the community association. Typically, the association incorporates as a nonprofit corporation. Incorporation can provide protection against liability, allow the association to hold title to property, and simplify the process of securing insurance policies. Articles of incorporation are filed with the secretary of state.

4. Bylaws

The bylaws are the operating guidelines for the association and typically include: meeting requirements, quorum requirements, number of officers and directors, and provisions governing books and records. Usually, the bylaws are recorded in the county recorders office.

5. Rules/Regulations/Resolutions

This is a broad category, and refers to those documents that are typically adopted by the board of directors without a vote of the owners (note: some associations may have owner approval requirements). Examples include: architectural guidelines, collections resolutions, enforcement procedures, and house rules. These documents are not recorded, which is why it is critical that owners receive and are on notice of these documents. Keep resolutions simple, be sure to cite to the authority for adopting the rule or regulation, and make sure owners know the reasons for adoption.

The Importance of the Plat Map

The significance of the plat map is often overlooked in community associations.  Put simply, the plat is a graphical depiction of lot boundaries, easements and other ownership interests.  Here's an example: Screen Shot 2014-12-15 at 6.26.18 PM

This is a plat map for a planned unit development subdivision. Condominium plats are slightly different, and include building elevations, unit boundaries, and common elements locations.

Notations on plats are important, too.  Examples of notations include: maintenance obligations, common area ownership, and utility company easements.  These notations are just as significant and important as provisions in your CC&Rs.

Now that you know how important your plat map is, you may be wondering how counties or municipalities keep track of who owns what and where property is located.  Plats contain very specific location information, starting with township, then range, and then section, like this:

Screen Shot 2014-12-15 at 6.26.40 PM

 

We can tell that the subdivision is located in the east 1/2 of Section 28, Township 1S, Range 1E, W.M. (Willamette Meridian).  This coordinate system is attributed to Thomas Jefferson, and was formalized in the Land Ordinance Act of 1785.  The Act called for the creation of townships 6 miles by 6 miles, with 36 square sections containing 640 acres.  Every township referenced a meridian, like the image above, which references the Willamette Meridian.

If you don't have a copy of your plat, many county recorder or survey offices provide the files online.  Here are links to access your plat map in the tri-county area:

Multnomah County: https://multco.us/surveyor/sail-survey-and-assessor-image-locator

Washington County: http://www.co.washington.or.us/AssessmentTaxation/GISCartography/maps-online.cfm

Clackamas County: http://www.clackamas.us/surveyor/